Long wooden desk with a laptop in front of a planter partition, grey office chairs behind
Implementing Hybrid Work

How do I calculate space requirements per employee with 3 office days a week?

Saskia
18.11.2026
10
min
Long wooden desk with a laptop in front of a planter partition, grey office chairs behind

With three office days a week, you do not calculate space requirements per head but via the expected peak attendance: the total number of employees multiplied by the attendance share on the busiest office day plus a buffer gives the number of workstations needed, and the desk sharing ratio and floor space follow from that.

“How many workstations do we still need if everyone is in the office three days a week?” In many companies, this question lands with Facility Management, usually shortly before management decides on rented space, a refurbishment or a new location. What is needed is a figure that can be recalculated. For Facility Management and Real Estate in companies with hybrid working models, the answer is therefore a transparent calculation rather than gut feeling: from attendance via the desk sharing ratio to floor space, with a worked example and the factors that shift the result.

Office space per employee: why the per head calculation no longer works

In the classic office model, all employees have a fixed desk, often in a single office or in small team rooms. This logic works as long as everyone is in the office on every working day. As soon as employees split their working time between the office, working from home and other places of work, looking purely at headcount leads to overcapacity. Office space per employee is then no longer used efficiently.

The decisive factor is the difference between average attendance over the week and peak attendance on the busiest office day. The average smooths out fluctuations but does not show how many people actually need a workstation at the same time. Space planning should therefore be based on the highest simultaneous attendance, not on a weekly or monthly average.

If you still plan with a fixed desk per person, desks stay empty on quiet days, meeting rooms go unused, and the costs of rented space, cleaning and operations keep running. At the same time, rooms for collaboration are often lacking on busy days because the space is tied up in individual workstations. Efficiency falls, and with it the quality of the working environment.

Step by step: from office days to the desk sharing ratio

The following calculation can be set up in any spreadsheet. Each step builds on the previous one, and the formula stays the same for every company size.

Step 1: Derive average attendance from 3 office days

Average attendance is office days per week divided by working days per week. With three office days in a five day week, you therefore calculate three divided by five, which is 0.6 or 60 per cent.

This share describes how often employees are in the office on average. It is the starting point, but it is not sufficient for capacity planning because it says nothing about how attendance is distributed across the days of the week.

Step 2: Determine the peak share

The peak share is the proportion of the workforce that is in the office at the same time on the busiest office day. It is higher than the weekly average because, with hybrid working models, office days are often concentrated on certain days.

Ideally, you determine the peak share from your own data: bookings, access figures, counts or network based presence. Peak attendance on a given weekday has a considerable influence on space planning and is therefore the key lever. Document your assumption openly so that everyone checking the calculation can follow its basis.

Step 3: Calculate the number of workstations from the peak share and buffer

The formula is: workstations needed = total number of employees × peak share on the busiest day + buffer in workstations.

The buffer absorbs irregular team days, guests, new employees and special appointments. Specify it as an absolute number of workstations, not hidden in percentage assumptions. This keeps the calculation transparent, and you can adjust the buffer in a targeted way in internal discussions.

Step 4: Calculate the desk sharing ratio

The desk sharing ratio describes the relationship between available workstations and the number of employees. The formula is: workstations divided by employees.

A ratio below 1 shows that employees share workstations; a ratio of 1 corresponds to one fixed desk per person. A value of 0.8, for example, means eight workstations for ten people. Because the metric refers to the busiest office day, it is more meaningful for office planning than an annual average.

Step 5: From the number of workstations to floor space

Office space is calculated as: workstations needed × space per workstation according to your space concept + additional space for meeting rooms, quiet retreats and communal areas.

The space per workstation comes from your own space programme, for example from internal standards, the planned furnishings or previous projects. We deliberately do not use a universal benchmark for office space per employee here, because it depends on the building, the office concept and its use. Minimum requirements arise from the German Workplace Ordinance and the technical rule ASR A1.2, more on this further down under occupational safety.

Consider meeting rooms, focus rooms, social areas and circulation space separately and then add them. Open plan offices need more circulation space than single offices, as well as additional overflow and quiet areas. Fewer individual workstations therefore do not necessarily lead to a proportional reduction in space.

Worked example with three office days a week

The following example shows the calculation for a fictitious company. All figures are freely chosen assumptions, not benchmarks and not a recommendation.

A company employs 500 people, and the policy provides for three office days a week. Assume your own data collection shows a peak share of 80 per cent on the busiest day, and Facility Management plans a buffer of 20 workstations.

The result: 500 × 0.80 + 20 = 420 workstations needed. The desk sharing ratio in the example is 0.84 (420 divided by 500). Office space is calculated as 420 × space per workstation according to your space concept, plus the space for meeting rooms, quiet zones and communal areas.

Overview table of the worked example

VariableAssumption in the exampleCalculation step and result
Total number of employees500Starting value
Office days per week3 of 5Average attendance = 3 / 5 = 0.6 (60 per cent)
Peak share80 per cent on the busiest day (assumption)to be determined from your own usage data
Buffer20 workstations (assumption)for guests, special appointments, fluctuations
Workstations needed500 × 0.80 + 20420
Desk sharing ratio420 / 5000.84
Office space420 × space per workstation according to your space concept + further space according to the space programmedepends on your space concept

How much space requirements change compared with fixed allocation depends on the factors in the next section.

Which factors shift the result

The calculation stays stable. What changes are the assumptions you put into the formula.

Peak days in the middle of the week

With hybrid working models, attendance is often concentrated in the middle of the week. Office days should be planned carefully to make good use of office capacity. The number of workstations needed is based on the busiest day, regardless of how empty Monday or Friday are. Evaluate attendance day by day to identify which day is the reference for your desk sharing ratio.

Teams with fixed office days

If teams agree fixed office days, this amplifies the peaks on certain days. A department that always works together in the office on the same two days needs considerably more workstations on those days than a department with a flexible distribution. Work with different peak shares per floor or zone instead of a single value for the whole company. Departments with shift or service presence have different patterns and should be calculated separately.

Meeting rooms, quiet retreats and communal areas

Hybrid office concepts provide more room types than just the desk: project areas, workshop rooms, phone booths, lounges. Space for meetings and communication is becoming more important in hybrid offices and at the same time creates better working conditions for focused work and collaboration. These rooms do not feed directly into the desk sharing ratio but shape space requirements considerably. Set separate allocations for focused work, collaboration and social use in the space programme.

Growth, staff turnover and organisational change

Headcount growth, new locations, reorganisations or project peaks change the peak share and buffer over time. Work with scenarios for how the number of employees develops and calculate space requirements separately for each scenario. If the workforce grows, you should recalculate the desk sharing model rather than simply projecting it forward.

Clean desk policy, hot desking and fixed team zones

A binding clean desk policy increases the usability of workstations and makes the desk sharing ratio more stable. Desk sharing only makes office space more efficient if every desk is actually usable and not blocked by personal belongings.

Fully flexible hot desking makes the most of the space but requires more orientation and clear rules. Fixed team zones make allocation easier but tie up reserves if the usage of individual teams fluctuates strongly. Both concepts affect the share of usable workstations. Desk sharing also requires reliable booking software so that employees can plan reliably and desk utilisation becomes visible.

Where the data for the peak share comes from

Reliable data for the busiest office day is the key to robust space planning. Assumptions without measurement can lead to bad investments: too much space costs rent, too little space costs productivity and wellbeing.

Booking data from desk booking and room booking

Booking data from desk booking and meeting room management provides a first approximation of office attendance. It shows how many workstations and rooms are reserved on which days. An important limitation: a booking is not the same as attendance. No shows and spontaneous use on site distort the figures in both directions.

Access data and counts

Access data from card readers shows how many people enter a location. It is often evaluated in aggregated form and is suitable for planning at location level, but rarely reflects the level of individual workstations. Manual counts or sample walk throughs can also be a starting point, especially at smaller locations.

Network based presence

Attendance can also be derived from the existing network infrastructure. Such approaches can capture attendance without evaluating individual people if the data is anonymised and evaluated in aggregated form. The infrastructure that hybrid workplaces need anyway thus becomes a data source for utilisation analysis.

Choosing the right measurement period

Choose the measurement period so that school holidays, public holidays and special events such as moves or refurbishments do not distort the picture. Several consecutive weeks smooth out outliers and give a realistic picture of attendance. Pay attention to data protection: our guide to measuring office utilisation in a GDPR compliant way describes what matters when collecting data.

Objection: “We would rather calculate generously, otherwise there will be complaints”

The argument is understandable: missing workstations cause annoyance faster than too much space, and the complaints end up with Facility Management. Even so, calculating generously without transparency is not a solution but a hidden cost driver.

Show the buffer openly instead of adding a flat surcharge

Show the buffer openly, for example “plus 20 workstations for guests and fluctuations”, instead of hiding it in an increased peak share. This changes the discussion: from “We simply need more space” to “We are deliberately planning with this buffer and will adjust it if necessary”. A lower desk sharing ratio can reduce the costs of office space without causing complaints if the buffer is calculated properly.

Adjust gradually with data

Start with a cautious buffer, observe actual usage and adjust capacity after a few weeks. This gradual optimisation creates acceptance, because bottlenecks are backed by figures rather than individual perceptions.

Take occupational safety and minimum requirements into account

When planning offices, employers must observe the German Workplace Ordinance (ArbStättV) and the technical rule ASR A1.2, which set minimum requirements for room dimensions and movement areas; these include the minimum size of workrooms and the room height. You should check the specific values and how they apply to your space concept with your occupational safety specialist. Desk sharing and high space efficiency must not come at the expense of safety, wellbeing and health protection.

How Seatti underpins the calculation with real usage data

The formula is only as good as the peak share you put into it. And that is exactly what many companies estimate: leases, refurbishments and operating costs depend on an assumption that nobody has measured. That is why we built Seatti so that workspace management and office intelligence come together in one system, directly in Microsoft 365. This turns the assumption in the worked example into a measured value.

Workspace management in Microsoft Teams and Outlook

With Seatti, employees book and coordinate workstations, meeting rooms, parking spaces and services directly in Microsoft Teams and Outlook, where they already work. For Facility Management, this means no additional tool that employees first have to get to know.

Office Intelligence with IP-based presence and Seatti Signals

Office Intelligence combines bookings, IP-based presence and existing infrastructure into a realistic picture of usage and shows utilisation, trends and savings potential. IP-based presence detects attendance automatically via the existing network infrastructure, without an additional check in; it only records the network login, without location tracking and without movement profiles. It is included from Intelligence Essentials, while Seatti Signals are part of Intelligence Pro.

Data protection and rollout

The usage data is pseudonymised and aggregated, without evaluating individual people, without geolocation and without time tracking; hosting in the EU, ISO 27001 certified, details are on our data protection page. The path to go live usually takes less than two weeks: kick off and technical installation take place on the first day, followed by admin training and configuration of the offices, and onboarding and go live in the second week. There are no implementation costs, and you can find the packages on the pricing page.

Evidence: bonprix and the quiet zone that did not stay one

How much measured values can shift assumptions is shown by bonprix. The fashion retailer redesigned its Hamburg campus for hybrid working, but the pilot areas were used much less often than planned. Based on the usage data and at the request of employees, bonprix completely redesigned an area planned as a quiet zone. In the twelve months from September 2025 to August 2026, more than 54,000 office days were planned, almost twice as many as in the previous year, with 66 % higher utilisation per workstation than in the previous year.

For your own calculation, this means: space requirements are not a one off project but a value that you review regularly with real figures.

From the calculation to the business case

The calculated space becomes an internal business case when you compare it with the status quo: current office space versus the calculated target size, repurposing instead of new leases, effects on operating costs. Prepare several scenarios, such as status quo, moderate refurbishment and consistent space reduction, and use the same calculation logic based on peak attendance in each scenario.

This gives Facility Management a basis for decisions with management, HR and finance in which every assumption is transparent and can be checked against data. The goal is office space that matches actual usage.

Would you like to see how Seatti runs in your Microsoft 365 environment? In a 30 minute walkthrough, we show how Seatti simplifies your office processes and puts your space decisions on a data driven footing.

Book a demo now

Read more: Measuring office utilisation in a GDPR compliant way and Choosing desk sharing software: 12 criteria.

Author and sources

Author: Saskia Neuner, Chief of Staff at Seatti. As of 18 November 2026.

Sources:

Frequently asked questions

How much office space per employee do you need with hybrid working?

There is no fixed value for all companies. Space requirements are derived from the number of workstations needed based on peak attendance and your own space per workstation. Meeting rooms, quiet zones and communal areas come on top. The German Workplace Ordinance and the technical rule ASR A1.2 set minimum requirements that must be met.

What is a desk sharing ratio?

The desk sharing ratio is the relationship between workstations and employees, based on the busiest office day. A ratio below 1 means desk sharing, a ratio of 1 means one fixed desk per person.

How do you calculate the desk sharing ratio?

Desk sharing ratio = number of workstations divided by number of employees. You determine the workstations beforehand via employees × peak share + buffer. The ratio is therefore only as reliable as your attendance data.

Which days are decisive for planning?

Plan according to the busiest office day. It is often in the middle of the week but should be determined with your own data, separately by location and, if necessary, by department.

How often should space requirements be recalculated?

Review space requirements and the desk sharing ratio regularly based on current usage data, for example when the working from home policy changes, after major staffing changes or before lease decisions. Ongoing analysis of office utilisation helps you to take corrective action in good time.

Enjoyed this article? Share it with a colleague.
Our mission at Seatti is to make hybrid work smarter and more efficient. By connecting people, workplaces, and real-time utilization data, we help companies create better office experiences and make smarter decisions about their spaces.
Saskia
Table of contents
Table of contents
See Seatti for yourself

An interactive tour of booking, presence and space utilisation. No appointment needed, right in your browser.

Your personal live demo

Get to know Seatti! We work out the potential for your company in around 30 minutes.